Whole House Fluoride Water Filter
The "Big Blue" Whole House Fluoride Water Filter by BelKraft
This product includes a 50 to 5 micron gradient pre-filter, a 20" Fluoride Filter and a carbon block cartridge.
There are plenty of good reasons for installing a fluoride water filter. The fluoride that is added to water also contains other toxic materials and pollutants, which may include lead, mercury, and arsenic. Hundreds of renowned scientists and researchers around the world condemn, or refuse to endorse fluoridation of the water supply. The fluoride water filter is a simple solution to a vexing problem. You may not have any control over what goes into your water, but this simple device can easily take it right back out.
About the Fluoride Filter:
The Whole House Fluoride Cartridge effectively removes fluoride from the water. Rated for up to 4 gpm (gallons per minute) flow, lasts approximately 8 to 12 month. 4.5" X 20". Fits industry-standard Big Blue housings.
If you would like to purchase replacement Fluoride Filter Cartridges, please call 1-877-523-7800 or write to firstname.lastname@example.org
About the Fluoride Filter Housing:
"Big Blue" Whole House Water Filter Housing for industry-standard 4.5" X 20" cartridges. Measures 24" tall X 7.28" across. 1" female pipe thread inlet and outlet.
Includes pressure release buttons, shut-ott valves, mounting bracket with screws, housing wrench and an extra pre-filter. Made from the highest quality FDA grade NSF listed polypropylene. Rated to 125 psi, 125 degrees F.
| Capacity (<100 ppm hardness):
| 9,000 ppm fluoride estimated
125 PSI (8.6 bar)
20 PSI (1.4 bar)
| Materials of Construction • End Caps: Polypropylene • Inner/Outer Wraps: Polyolefin • Netting: Polyethylene • Gaskets: Buna-N